Silo Equipments
- Home
- Products
Sweep Auger
Sweep Auger rotates 360 degrees around the silo’s center to direct the grain residue to the exhaust port. PTSilo sweeps are equipped with a powerful leading apparatus driven by the main motor with an automatic system for advancement control. Capacity, spiral diameter, motor power, and other parameters are customized according to the silo and customer demands.
Discharging Spiral
This device is used for discharging materials to the outside with a capacity of maximum 100 Ton/hr. If higher capacity is required, chain and tunnel conveyors should be placed in the foundation. All of the equipment are provided according to the required capacity. The equipment has an inlet from the center of the silo (as the main vent), and two other inlets along the spiral; all of them can be controlled manually from outside of the silo.
Pre-winnover
Pre-winnower is used for the separation of impurities of raw materials in cereal storage and processing factories. This device is able to separate large impurities such as wood pieces, wheat, paper, stone, clod, as well as fine and light weight impurities like dust, straw and soil with high capacity and low energy consumption.
Electrical Distributor
This device is used to distribute material and grains. The PTSilo’s distributors is made of extremely strong galvanized plates with separate outlets; each one of them is placed in the upper part of the lifter. The distribution of the grain from each channel is controlled according to demand and capacity. The grain outlet direction could be set manually or automatically. The distributors are controlled by magnetic sensors, so that dust cannot penetrate them.
Silo Elevator
This device is used to transfer product vertically to thedesired height. Elevators are produced according to customer requirements in different capacities ranging from 250-1000 tons per hour. Bucket elevators lift powders, granules, and small lumpscontinuously Buckets attached to belts or chains carrymaterials to the top Material is loaded into each bucket forgentle handling. The capacity, environmental conditions, physical and chemical characteristics of materials play a very important role in the design of the elevators. Elevator is widely used in food, petrochemical, steel, metal smelting, mines, ports and grain storage silos.
Elevator Tower
To reinforce the high elevators, some towers are manufactured by hot dip galvanized coating. The platform of these towers is located on the top part of the elevator that is a part of the distributor.
Inclined Conveyor
It is manufactured by thick galvanized body with the capacity ranging from 5-200 ton/hr and more. It is provided in two forms of flat and curved, capable of being installed up to 45 degrees. Body connections are bolts and nuts, facilitating assembly and installation of the device. The conveyor chain is designed in such a way that despite the angularity of the device, it prevents the load from falling backwards.
Belt Conveyor
This is used to transfer material horizontally with high capacity. It is manufactured in the capacity of 40-1000 ton/hr.
Chain Conveyor
The entire body of all PTSilo’s conveyers is coated with a galvanized, and all of the joints are made of nuts and bolts. The initial and end part of the conveyer is sent completely assembled. Central parts are easily replaceable; it is easy to access the internal parts of the device. To conduct the chain, high density plastic rollers or rails made of UHMW are used. It is equipped with an explosion vent, hatch and micro switch to prevent suffocation, as well as a chain wheel telemeter. All of the chain parts are made of special steel with of 50-60 Rockwell hardness. The plastic parts at the head of the chains are made of UHMW to prevent them from direct collision to the body.
Discharge Vibrator
This device is used for the discharge of materials being stored in powder or similar form either in metal or concrete silos. Making a vibration via the vibrator electromotor, PTSilo’s Discharge Vibrator discharges the silo easily with a uniform flow.
Water Storage System
Pars Turk Silo prefabricated pool or cylindrical water tank is used to store water in agricultural lands, greenhouses, livestock and poultry breeding units and even to store drinking water in residential and industrial settlements. It can be installed anywhere of the complex. For example, it can be placed inside the greenhouse so that the temperature of the water is the same as the temperature of the greenhouse environment.
Aquatic Species Tank
Tanks for raising aquatic species are used in order to increase the quality of production and modification of the methods for the production of fish and other aquatic species. This tank is very effective in preservation of security and health of farm-raised aquatic species especially in high quantity production